Just follow these instructions to set
up the Point-of-Purchase
Critter Display:
Step1.
Location
Find a high traffic area to set up
your Critter Control Center. the spot is important, as this
display can not be moved when assembled.
Step 2. Base Assembly
1. Open both boxes and find the base (it's
the larger folded piece on top).
2. Take the base and lay it on the floor with
the narrow side facing away from you.
3. Fold the bottom (the wide part) into a rectangle
along the perforations.
4. Fold the tabs on the bottom of the base
inward to steady the display, then stand the base upright with the
narrow side on top.
5. Fold the large flap at the perforations
and insert into the tabs on the back of the base
Step 2. Stacking Modules
Take the product modules and stack them in the following manner starting
from the bottom of the display:
1. Scoot® Deer, Rabbit, or Squirrel
2. Scoot® Mole
3. Scoot® Mole
4. Scoot® Deer, Rabbit, or Squirrel
Step 3. Header Card
Take the Header Card and fold it along the perforations and slide
the tabs at the bottom of the Header Card into the slots in the top
module, taking care that the tabs go between the double walls in the top
module.
|
